We think robots are awesome.
When you buy an awesome robot you become awesome. Are you ready to be awesome?

Cart

mDrawBot Blue With Bluetooth

mDrawBot Blue With Bluetooth

Availability: Out of stock

$395.00

Out of stock

 

What is mDrawBot?

mDrawBot is the world’s most fully-featured four-in-one drawing robot. It can be assembled into 4 different configurations: mScara, mSpider, mEggBot, and mCar.

A varity of components

This kit consists of over 60 components from Makeblock, including beams, brackets, motor, etc. It also comes with a specially-designed software named mDraw to control these robots. Here’s the picture of all the components.

 

mScara

mScara is a SCARA (Selective Compliance Articulated Robot Arm) driven by stepper motors. Adding a pen on mScara, it can draw pictures on a flat surface. You can also turn mScara into a desktop laser engraver replacing the pen with a laser diode.

mSpider

mSpider is a drawing robot which can draw pictures on a wall or a white board. Two stepper motors control the movement of mSpider though strings. Theoretically, its drawing range can be expanded by increasing the length of the strings.

 

mEggBot

mEggBot is designed to draw on things that are improbable to print on, such as eggs or ping-pong balls. It can be used to write letters, draw expressions on spheroid, or draw Easter eggs.

mCar

mCar is a three-wheel robot car, which contains two stepper-motor-drive wheels and a ball-caster wheel. It can draw its own movement tracks on flat surface. Installing a chalk instead of a pen, it can draw on the floor.

 

Software

mDraw is the software specially designed for mDrawBot. After installing the mDraw software, you can import images that you wish your robot to draw. It is completely compatible with the four forms of mDrawBot and also both the servo mode and laser mode of Makeblock XY Plotter V2.0.

A Drawbot, and More than A Drawbot

This kit consists of over 60 components from Makeblock, including beams, brackets, motor, etc. It also comes with a specially-designed software named mDraw to control these robots. Here’s the picture of all the components.Here are some examples of what you can do:

mDrawBot Animation Assembly

 

mScara

  

mSpider

mEggbot

  

mCar

WARNING:

Due to the particularity of laser, the application scope of the laser pack and products that included laser module is limited, please do not expand their application scope. Limitations are as follows:

1. The laser pack can only be used in the following kit:

• Use in mScara, one building form of mDrawbot

• Use in XY Plotter Robot Kit (With Electronic Modules)

(Note: For kits that included laser pack, we provide detailed manual and technical support.)

2. The laser pack can only be used in the following DIY product:

• DIY XY Plotter Robot Kit (Without Electronic Modules)

• Other DIY products for personal use or agency use, for instance, transforming XY plotter or 3D Printer.

(Note: For using laser pack in DIY products, we only provide laser specification.)

PART LIST

Version: Bluetooth

1 x Beam 0824-032 1 x Threaded Shaft 4x39mm 50 x Nut M4
2 x Beam 0824-096 1 x Circle Shaft D4x80mm 4 x Nylon Stud M4x30
3 x Beam 0324-184 2 x Shaft Collar 4mm 2 x Plastic Ring 4x8x1mm
3 x Bracket 3×3 5 x Flange Bearing 4x8x3mm 8 x Plastic Ring 4x7x3mm
3 x Plate 3×6 1 x Square Nut M4 4 x Plastic Ring 4x7x10mm
1 x Bracket U1 3 x Nylon Cap Nut M4 2 x Plastic Rivet R4060
4 x Timing Pulley Slice 90T 1 x Polyester Thread(8m) 4 x Plastic Rivet R40120
2 x 42BYG Stepper Motor Bracket 2 x Timing Belt 112MXL 1 x 9g Micro Servo Pack
2 x Plastic Timing Pulley 90T 10 x Nylon Cable Tie 2 x100 2 x 42BYG Stepper Motor
2 x Tire 90T B 1 x Rubber Bank 2 x Base Bracket
1 x Caster Wheel 1 x Cross&2.5mm HEX Screwdriver 1 x Battery Holder
2 x Rubber Blanket 1 x HEX Key 1.5mm 1 x Makeblock Orion
2 x Shaft Connector 4mm 1 x Wrench 5mm&7mm 2 x Me Stepper Motor Driver
2 x Timing Pulley 18T 26 x Screw M4x8 1 x RJ25 Adapter
1 x Pen Holder and V Clamp 42 x Screw M4x16 1 x AC/DC Adapter 12V/2A
2 x 2 Inch G Clamp 5 x Screw M4x22 1 x 9g Servo Extension Cord
1 x Plastic Hinge 1 x Screw M4x35 2 x 6P6C RJ25 Cable-20cm
1 x Plastic Hinge Gasket 6 x Headless Set Screw M3x5 1 x 6P6C RJ25 Cable-35cm
1 x Spring 0.6x6x50 8 x Countersunk Screw M3x8 1 x Micro USB Cable
1 x Me-Bluetooth 4.0 1×tape 100cm(Paper)